Loading ...
Loading ...
Loading ...
19
Function of the various parts:
1. Threaded rod on the adjusting rib:
for adjusting the furniture door vertically.
2. Fixing angle:
for adjusting the cabinet frontage in terms of depth.
3. Nuts on the threaded rod:
for securing the cabinet front in order to prevent lateral
sliding.
4. Lower fixing angle:
for securing the cabinet front in order to prevent lateral
sliding
Connecting element for furniture doors
Instead of one large door, two furniture doors can be
mounted next to each other in the case of appliances
with a width of 91 cm. These furniture doors are then
connected using a metal strip on the rear.
This metal strip is available from your dealer as an
installation accessory (Connection element for furniture
doors). For further details see section “Tools and
Accessories which are needed”.
When attaching the metal strip to the furniture doors,
watch out for the maximum possible length of the screws
and the position of the drill holes. Always carry out
screwing jobs on the most stable part of the furniture door.
Never screw into fillings or similar areas.
Note:
If only one door is to be mounted to an appliance with
a width of 91 cm, attach the supplied sandwich plate to the
adjusting rib and fix into position.
17. Loading the appliance door
When attaching the furniture doors it is recommended to
load the storage sections in the door with weights in order
to ensure that the when adjusting crack dimensions turn
out to be as precise as possible.
Loading recommendations:
18. Attach the adjusting rib to the
furniture door (refrigerator
compartment)
Note:
The adjusting rib is the most important tool for adjusting the
cabinet frontage.
Unscrew the positioning aids from the appliance door.
The positioning aids will still be needed in the course
of mounting.
Remove the covering rail from the freezer room
drawer.
Overall width of the
furniture door
Refrigeration compartment door 2 x 12 kg
Freezer drawer 10 kg
Loading ...
Loading ...
Loading ...