Loading ...
Loading ...
Loading ...
27
Attach the covering bars using the adjusting ribs of the
freezer compartment drawer.
27. Mounting the air separator
Using the air separator, air which is supplied and drawn
from the appliance is fed seperately, in order to avoid
reduced operating capacity.
Cut the air separator to the desired lengths.
To attach the air separator, slide the two clips over
the dispenser and screw to the door. Adjust the air
separator to the mid line of the door (see figure).
Slowly close the door. Check whether the air
separator collides with parts of the ventilation grid.
Where necessary, shorten the longitudinal side of
the air separator by 6 mm max.
28. Setting the door opening angle
(refrigerator compartment door)
According to the set up conditions, it may be necessary to
limit the door opening angle. A door opening angle of 115°
is set at the factory.
To set the door opening angle to 90°:
Open the door to 90°.
Insert stopper rod in the drill holes which are now
vertically on top of each other and drive home with
a hammer.
29. Tense the hinge screws
(refrigerator door)
To activate the hinges:
Turn the setting screw with a cross head screwdriver.
I = screw tension activated
0 = screw tension not activated
Loading ...