Loading ...
Loading ...
Loading ...
17
13. Connecting water to the appliance
Supplied, is a flexible hose for a domestic mains
connection ¾”. Care should be taken than the supplied
sealing elements are mounted on the appliance and the
shut-off valve!
m Warning!
Do not kink the hosepipe when bending, otherwise
there is the risk of water damage and leakage.
Remove the plugs from the appliance connection (1).
Lay the water hose such that it ends at the appliance
connection (2).
Slide the union nut and the sealing element onto the
water hose.
Attach the water hose to the appliance connection
and screw on the union nut (3). Screw tightly, using
manual force.
Screw the union nut tightly using the fixed spanner. Do
not over tighten!
Turn the shut-off valve and the main water tap.
Re-examine the point of connection at the shut-off
valve and the appliance connection for leaks.
14. Attaching the base strip
m Warning!
From the floor upwards, the maximum height of the
base strip is 10.1 cm. Never cover the ventilation
cracks in the base panelling. Risk of damage to the
appliance.
Where necessary, cut the base strip to the required
length.
Attach base panelling to the appliance.
Take the protective film off from the adhesive pads
on the Velcro strip.
Put the base strip onto the base panelling and push
firmly.
Measure the difference in depth Y between the base
panelling and the base strip of the adjacent lower
cabinets.
Remove the base panelling again.
Loosen the fastening joint of the base panelling.
Loading ...
Loading ...
Loading ...