Loading ...
Loading ...
Loading ...
24
23. Fix the furniture door
(freezer compartment)
Important note:
Now attach the door handles which should have been
screwed from behind!
Hang the furniture door on the threaded rod.
Screw the nuts on the threaded rod. Do not screw
tightly!
Adjust the furniture door as accurately as possible.
Adjust the furniture door using the threaded rod
(Torx screwdriver). Re-examine the dimensions of
the crack continuously.
Attaching the fixing angles:
Lift the furniture door somewhat from the appliance
door.
Press the upper fixing angle (without clip (1.)) on the
right and left at position
c using the screws.
Insert the fixing angle (with clip (2.)) on the right and left
at position
d into the fixing plate and slide over the
screws of the appliance door. Slowly lower the door in
order to repeat the procedure in
e.
Close the door and re-examine to make sure that the
depth of the cabinet frontage corresponds with the
adjacent lying fronts. Correct if necessary.
Tighten the fixing anglescrews in order to fix the depth
adjustment.
Close the door and check the lateral adjustment.
Correct the adjustment by lightly banging on the edge
of the open door by hand.
Screw the nuts on the adjusting rib tightly.
This way, the lateral adjustment of the door is fixed.
24. Screw on the lower fixing angle
Screw on the lower fastening angles from the auxiliary
set. Pre-drill holes into the furniture door!
The lateral adjustment of the door is fixed through the
lower fastening angles.
Loosen screw
Check the lateral position of the door
Loading ...
Loading ...
Loading ...