Loading ...
Loading ...
Loading ...
13
Mark the installation height (underside edge of the
plank) on the rear wall of the niche.
Select the screws according to the thickness of the
wooden plank: Length min. 2.5 x wood thickness,
diameter 12 or 14 mm.
Select the number of screws corresponding to the
niche width so that you ensure that the plank can be
securely mounted.
According to the subsurface:
Look for the supports on the rear wall of the niche and
mark the drill holes on the plank corresponding to the
position of the support.
or
Fasten suitable dowel into the rear wall.
Pre-drill.
Screw the plank onto the rear wall of the niche.
7. Preparing the water connection
(only for appliances which require a water connection)
m Warning!
Turn off the main water tap in order to avoid damage
from escaping water.
Lay the connection pipe. Always keep to the given
installed area in order to avoid damaging the
connection pipe when sliding the appliance in later.
Fix the connection pipe to the floor with adhesive tape.
8. Attaching the edge protectors
In order to protect the edges of the installation niche,
attach the supplied protection ribs with adhesive tape.
Loading ...
Loading ...
Loading ...