Loading ...
Loading ...
Loading ...
5
Electrical connection
Do not use an extension lead or a multi-plug socket.
Connecting this appliance, only use a plug which has
been installed securely.
The plug to secure the appliance must be freely accessible.
Connect the appliance to a 220–240 V/50 Hz ac current
via a plug which has been properly installed. The socket
must be fused with a 10 to 16 A fuse.
For appliances operated in non-European countries,
the identification plate should be checked whether the
electric supply and the current model stated match the
vales of the mains supply. For details regarding the position
of the identification plate, see section “Calling Customer
Service / Identification Plate”. Any necessary exchanging of
the mains lead should carried out by a specialist electrician.
m Warning!
On no account should the appliance be connected to
electric saving plugs or to converters which convert dc
current to 230 V ac e.g. solar appliances, marine
current mains networks.
Water Connection
A cold water connection is necessary for operating the
automatic ice maker. The water pressure must lie between
1.7 and 10 bar. The installation must correspond to the
local plumbing regulations.
A separate shut-off valve should be installed in the cold-
water inflow.
The shut-off valve should not be located behind the
appliance. It is recommended that you mount the shut-off
valve directly next to the appliance or at another place
which is easily accessible.
When installing the water connection, pay attention to the
permissible installation area for the water mains. For more
information concerning the permissible installation areas,
see the section “Installation Dimensions”.
Note:
The maximum outside diameter of the water mains (without
connecting pieces) is 10 mm.
Loading ...
Loading ...
Loading ...