Loading ...
Loading ...
Loading ...
18
Take out/slide in the joint around the measured
depth Y.
Screw the joint again tightly.
Fasten the base panelling.
Note:
If necessary, the base strip can also be screwed to the
base panelling. Pre-drilled screw holes are located in the
base panelling in the area of the Velcro strip.
15. The appliance is switched on
The appliance should now be switched on for the first time
in order to ensure the accuracy of the following mounting
steps and with it, the appearance of the entire kitchen
frontage.
Open the appliance door.
Actuate the appliance’s on/off button.
Only for appliances with a water connection:
In the case of possible damage of the water mains, keep
the shut-off tap closed in order to avoid the risk of damage
from water coming out.
16. Preparing the furniture doors
Important note:
When working on the furniture doors, care should be taken
to the following:
– Always carry out screwing jobs on the most stable part
of the furniture door. Never screw into fillings or similar
areas.
– Always selects screws with a length smaller than the
thickness of the cabinet front.
– Protect the surfaces of the furniture doors during
installation against damage.
The overall weight of the furniture door including the handle
should not exceed the following values:
The furniture doors are attached to the appliance with the
fastening elements located on the appliance. Using these
fastening elements, this allows the furniture door to be
adjusted accurately and securely attached to the
appliance.
Overall width of the
furniture door
Refrigeration compartment door 2 x 5 kg
Freezer drawer 10 kg
Loading ...
Loading ...
Loading ...