Loading ...
Loading ...
Loading ...
20
Measure the distance X between the adjusting rib and
the upper edges of the neighbouring furniture doors.
Mark this value X on the rear side of the furniture door.
Determine the middle of the door and label it.
Loosen the two nuts and remove the adjusting rib.
Rest the adjusting rib on the furniture door and align to
the markings. Mark the drill holes.
Pre-drill the holes.
Tightly screw the adjusting rib.
Note:
– Attach the adjusting rib with at least 6 screws on the
furniture door. One screw should be screwed in under
the threaded rod in each case.
– The adjusting rib has a various holes for different
furniture door design variations. Always carry out
screwing jobs on the most stable part of the furniture
door.
19. Hang and align the furniture door
(refrigeration compartment)
Note:
The height of the cabinet frontage is set using the threaded
rod.
Hang the furniture door on the threaded rod.
Adjust the furniture door using the threaded rod
(Torx screwdriver)
Transfer the middle drilled holes on the outside edge
of the appliance door to the furniture door.
Remove furniture door.
Loading ...
Loading ...
Loading ...