Loading ...
Loading ...
Loading ...
X
Touch recessed sensor surface : on the
door handle until the side windows and the
panorama roof with power tilt/sliding panel
are fully closed.
i
Make sure you only touch recessed sensor
surface :.
X
Make sure that all the side windows are
closed.
X
Make sure that all the side windows and the
panorama roof with power tilt/sliding panel
are closed.
On vehicles with a panorama roof with power
tilt/sliding panel:
X
Touch recessed sensor surface : on the
door handle again until the roller sunblind of
the panorama roof with power tilt/sliding
panel closes.
X
To interrupt convenience closing: release
recessed sensor surface : on the door han-
dle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
X
Close all the doors.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock (Y page 123).
X
Pull the corresponding switch on the door
control panel until the side window is com-
pletely closed (Y page 83).
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch on
the door control panel until the side window is
completely closed (Y page 83).
X
Hold the switch for an additional second.
X
If the respective side window remains closed
after the button is released, then it has been
set correctly. If this is not the case, repeat the
steps above.
Problems with the side windows
G
WARNING
If you close a side window again immediately after it has been blocked or reset, the side window
closes with increased or maximum force. The reversing feature is then not active. Parts of the
body could be trapped in the closing area in the process. This poses an increased risk of injury or
even fatal injury.
Make sure that no parts of the body are in the closing area. To stop the closing process, release
the switch or push the switch again to reopen the side window.
Side windows
85
Opening and closing
Z
Loading ...
Loading ...
Loading ...