User Manual - Page 123

For CLA.

Loading ...
Loading ...
Loading ...
i
If you activate the residual heat function at
high temperatures, only the ventilation will be
activated. The blower runs at medium speed.
i
You cannot use the ventilation to cool the
vehicle interior to a temperature lower than
the outside temperature.
Activating/deactivating
X
Turn the SmartKey to position g in the igni-
tion lock or remove it (Y page 123).
X
Press the Ì button.
The indicator lamp in the Ì button lights
up or goes out.
The indicator lamp in the button indicates that
the respective function is activated.
i Residual heat is deactivated automatically:
R
after approximately 30 minutes
R
when the ignition is switched on
R
if the battery voltage drops
Air vents
Important safety notes
G
WARNING
Very hot or very cold air can flow from the air
vents. This could result in burns or frostbite in
the immediate vicinity of the air vents. There
is a risk of injury.
Make sure that all vehicle occupants always
maintain a sufficient distance to the air out-
lets. If necessary, redirect the airflow to
another area of the vehicle interior.
In order to ensure the direct flow of fresh air
through the air vents into the vehicle interior,
please observe the following notes:
R
keep the air inlet between the windshield and
the hood free of blockages, such as ice, snow
or leaves.
R
never cover the air vents or air intake grilles in
the vehicle interior.
i
For optimal climate control in the vehicle,
open the air vents completely and set the
adjusters to the central position.
Setting the air vents
:
Side window defroster vent
;
Side air vent
X
To open a side air vent: turn the adjuster in
side air vent ; to the left.
X
To close a side air vent: turn the adjuster in
side air vent ; clockwise as far as it will go.
i
The center and rear air vents are adjusted in
the same way.
Air vents
121
Climate control
Z
Loading ...
Loading ...
Loading ...