User Manual - Page 74

For CLA.

Loading ...
Loading ...
Loading ...
Changing the settings of the locking
system
You can change the settings of the locking sys-
tem. This means that only the driver's door and
the fuel filler flap are unlocked when the vehicle
is unlocked. This is useful if you frequently travel
on your own.
X
To change the setting: press and hold the
% and & buttons simultaneously for
approximately six seconds until the battery
indicator lamp flashes twice (Y page 73).
If the setting of the locking system is changed
within the signal range of the vehicle, pressing
the & or % button:
R
locks or
R
unlocks the vehicle
The SmartKey now functions as follows:
X
To unlock: press the % button once.
X
To unlock centrally: press the % button
twice.
X
To lock centrally: press the & button.
The KEYLESS-GO function is changed as fol-
lows:
X
To unlock the driver's door: touch the inner
surface of the door handle on the driver's
door.
X
To unlock centrally: touch the inner surface
of the door handle on the front-passenger
door or the rear door.
X
To lock centrally: touch the outer sensor
surface on one of the door handles.
X
To restore the factory settings: press and
hold the % and & buttons simultane-
ously for approximately six seconds until the
battery check lamp flashes twice
(Y page 73).
Mechanical key
General notes
If the vehicle can no longer be locked or
unlocked with the SmartKey or KEYLESS-GO,
use the mechanical key.
If you use the mechanical key to unlock and
open the driver's door or the trunk lid, the anti-
theft alarm system will be triggered (Y page 68).
There are several ways to turn off the alarm:
X
To deactivate the alarm with the key: press
the % or & button on the key.
or
X
Insert the SmartKey into the ignition lock.
or
X
To deactivate the alarm with KEYLESS-GO:
press the Start/Stop button in the ignition
lock. The SmartKey must be in the vehicle.
or
X
Lock or unlock the vehicle using KEYLESS-
GO. The SmartKey must be outside the vehi-
cle.
If you unlock the vehicle using the mechanical
key, the fuel filler flap will not be unlocked auto-
matically.
X
To unlock the fuel filler flap: insert the
SmartKey into the ignition lock.
Removing the mechanical key
X
Push release catch : in the direction of the
arrow and at the same time remove mechan-
ical key ; from the SmartKey.
For further information about:
R
Unlocking the driver's door (Y page 77)
R
Unlocking the trunk (Y page 82)
R
Locking the vehicle (Y page 77)
Inserting the mechanical key
X
Push mechanical key ; completely into the
SmartKey until it engages and release
catch : is back in its basic position.
72
SmartKey
Opening and closing
Loading ...
Loading ...
Loading ...