Loading ...
Loading ...
Loading ...
wise, components or systems could be dam-
aged.
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it is
lying correctly on the fuse box. Moisture seep-
ing in or dirt could otherwise impair the oper-
ation of the fuses.
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the compo-
nents on the circuit and their functions stop
operating.
Blown fuses must be replaced with fuses of the
same rating, which you can recognize by the
color and value. The fuse ratings are listed in the
fuse allocation chart.
The fuse allocation chart is in the fuse box in the
front-passenger footwell (Y page 289).
If a newly inserted fuse also blows, have the
cause traced and rectified at a qualified special-
ist workshop, e.g. an authorized Mercedes-Benz
Center.
Before changing a fuse
X
Secure the vehicle against rolling away
(Y page 142).
X
Switch off all electrical consumers.
X
Vehicles without KEYLESS-GO: remove the
SmartKey from the ignition lock.
X
Vehicles with KEYLESS-GO start-function
or KEYLESS-GO: open the driver's door.
The vehicle electronics are now in position
g. This corresponds to the SmartKey being
removed from the ignition.
The fuses are located in various fuse boxes:
R
Fuse box in the engine compartment on the
left-hand side of the vehicle, when viewed in
the direction of travel
R
Fuse box in the front-passenger footwell
The fuse allocation chart is on the fuse box in the
front-passenger footwell (Y page 289).
Fuse box in the engine compartment
G
WARNING
When the hood is open and the windshield
wipers are set in motion, you can be injured by
the wiper linkage. There is a risk of injury.
Always switch off the windshield wipers and
the ignition before opening the hood.
X
Open the hood.
X
Use a dry cloth to remove any moisture from
the fuse box.
X
To open: open clamps ;.
X
Fold up cover : in the direction of the arrow
and remove it.
X
To close: check whether the seal is lying cor-
rectly in cover :.
X
Insert cover : at the back into openings =
on the fuse box.
X
Fold down cover :.
288
Fuses
Breakdown assistance
Loading ...
Loading ...
Loading ...