Loading ...
Loading ...
Loading ...
Canada only
:
Sets the temperature, left (Y page 117)
;
Sets climate control to automatic (Y page 117)
=
Defrosts the windshield (Y page 118)
?
Increases the airflow (Y page 118)
A
Sets the air distribution (Y page 117)
B
Display
C
Switches air-recirculation mode on/off (Y page 120)
D
Activates/deactivates climate control (Y page 116)
E
Sets the temperature, right (Y page 117)
F
Switches the residual heat on or off (Y page 120)
G
Switches cooling with air dehumidification on/off (Y page 116)
H
Reduces the airflow (Y page 118)
I
Switches the rear window defroster on/off (Y page 119)
J
Switches the ZONE function on/off (Y page 118)
Optimum use of dual-zone automatic
climate control
Climate control system
The following contains instructions and recom-
mendations to enable you to get the most out of
your dual-zone automatic climate control.
R
Activate climate control using the à and
¿ buttons. The indicator lamps in the
à and ¿ buttons light up.
R
Set the temperature to 72 ‡ (22 †).
R
Only use the "Windshield defrosting" function
briefly until the windshield is clear again.
R
Only use air-recirculation mode briefly, e.g. if
there are unpleasant outside odors or when in
a tunnel. The windows could otherwise fog up,
since no fresh air is drawn into the vehicle in
air-recirculation mode.
R
Use the ZONE function to adopt the temper-
ature settings on the driver's side for the
front-passenger side as well. The indicator
lamp in the á button goes out.
R
Use the residual heat function if you want to
heat or ventilate the vehicle interior when the
ignition is switched off. The residual heat
function can only be activated or deactivated
with the ignition switched off.
R
If you change the settings of the climate con-
trol system, the climate status display
appears for approximately three seconds at
the bottom of the screen on the multimedia
system display; see Digital Operator's Man-
Overview of climate control systems
115
Climate control
Loading ...
Loading ...
Loading ...