User Manual - Page 178

For CLA.

Loading ...
Loading ...
Loading ...
Switching on Blind Spot Assist
X
Make sure that Blind Spot Assist is activated
in the on-board computer (Y page 188).
X
Turn the SmartKey to position 2 in the igni-
tion lock.
Warning lamps : in the exterior mirrors light
up red for approximately 1.5 seconds and
then turn yellow.
Lane Keeping Assist
General notes
Lane Keeping Assist monitors the area in front of
your vehicle by means of multifunction cam-
era : which is attached behind the top of the
windshield. Lane Keeping Assist detects lane
markings on the road and can warn you before
you leave your lane unintentionally.
This function is available in the range between
40 mph and 120 mph (60 km/h and 200 km/h).
A warning may be given if a front wheel passes
over a lane marking. It will warn you by means of
intermittent vibration in the steering wheel for
up to 1.5 seconds.
Important safety notes
G
WARNING
Lane Keeping Assist cannot always clearly
detect lane markings.
In such cases, Lane Keeping Assist can:
R
give an unnecessary warning
R
not give a warning
There is a risk of an accident.
Always pay particular attention to the traffic
situation and keep within the lane, especially
if Lane Keeping Assist alerts you.
G
WARNING
The Lane Keeping Assist warning does not
return the vehicle to the original lane. There is
a risk of an accident.
You should always steer, brake or accelerate
yourself, in particular if warned by Lane Keep-
ing Assist.
If you fail to adapt your driving style, Lane Keep-
ing Assist can neither reduce the risk of an acci-
dent nor override the laws of physics. Lane
Keeping Assist cannot take into account the
road, traffic and weather conditions. Lane Keep-
ing Assist is merely an aid. You are responsible
for the distance to the vehicle in front, for vehi-
cle speed, for braking in good time and for stay-
ing in your lane.
The Lane Keeping Assist does not keep the vehi-
cle in the lane.
The system may be impaired or may not function
if:
R
there is poor visibility, e.g. due to insufficient
illumination of the road, or due to snow, rain,
fog or spray
R
there is glare, e.g. from oncoming traffic, the
sun or reflection from other vehicles (e.g. if
the road surface is wet)
R
the windshield is dirty, fogged up, damaged or
covered, for instance by a sticker, in the vicin-
ity of the camera
R
there are no or several unclear lane markings
for one lane, e.g. roadworks
R
the lane markings are worn away, dark or cov-
ered up, e.g. by dirt or snow
R
the distance to the vehicle in front is too short
and thus the lane markings cannot be detec-
ted
R
the lane markings change quickly, e.g. lanes
branch off, cross one another or merge
R
the road is narrow and winding
R
there are highly variable shade conditions on
the roadway
Switching on Lane Keeping Assist
X
Switch on Active Lane Keeping Assist using
the on-board computer; to do so, select
StandardStandard or AdaptiveAdaptive (Y page 176).
If you drive at speeds above 40 mph
(60 km/h) and lane markings are detected,
the lines in the assistance graphic are shown
176
Driving systems
Driving and parking
Loading ...
Loading ...
Loading ...