Loading ...
Loading ...
Loading ...
76
Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen wip-
ers stop.
Note:
in foggy weather or in snow,
the brightness sensor can detect suf-
ficient light. As a consequence, the
lights will not come on automatically.
Deactivation
The deactivation of this function is
accompanied by a message on the
multifunction display.
The function is deactivated tempo-
rarily when you use the manual lights
stalk.
Manual "Follow-me-home" lighting
When the automatic switching on
of the lights function is deactivated
,
the side lights and dipped headlamps
remain on for the duration selected for
the automatic "follow-me-home" lighting.
If the vehicle is not fitted with the
automatic switching on of the lights
function
, when you leave your vehicle,
the side lights and dipped headlamps
remain on for thirty seconds.
Direction indicators (flashers)
Left:
downwards.
Right:
upwards.
Note:
if you forget to cancel the di-
rection indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Automatic "Follow me home"
lighting
With the ignition off, when you leave
your vehicle with the
automatic
switching on of the lights function
activated
, the side lights and dipped
headlamps remain on for the select-
ed duration.
Activation:
switch off the engine,
"flash" the headlamps,
get out of the vehicle and lock it.
Deactivation:
"flash" the headlamps again,
get out of the vehicle and lock it.
To deactivate or activate
this function, go to the multi-
function display configura-
tion menu.
The duration of the timed
period must also be set (15, 30,
60 seconds), via the multifunction
display configuration menu, except
in the case of the
monochrome
screen A
for which it is pre-set.
Cancelling:
"flash" the headlamps,
get out of the vehicle and lock it.
To switch the function on
or off, use the multifunction
display configuration menu.
Activation
The activation of this function is
accompanied by a message on the
multifunction display.
The function is activated when the
manual lights stalk is in position
0
.
If the brightness sensor does not
function correctly
, the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction
display.
Contact a PEUGEOT dealer.
Do not cover the brightness
sensor, coupled with the rain
sensor, located in the centre
of the windscreen, behind
the interior mirror. It is used for the
automatic switching on of the lights.
Loading ...
Loading ...
Loading ...