Loading ...
Loading ...
Loading ...
103
Note:
the speed also flashes when
the limiter cannot prevent the vehi-
cle from exceeding the programmed
speed (on a steep descent, in the
event of sharp acceleration).
To reactivate the limiter, release the
accelerator to slow down to a speed
below the programmed speed.
Switching the function off
Place dial
1
in position
0
or switch
off the ignition to switch the sys-
tem off. The last programmed
speed remains in the memory.
Operating fault
In the event of a limiter malfunction,
the programmed speed is cleared,
the dashes flash for a few seconds:
Contact a PEUGEOT dealer to have
the system checked.
In the event of a steep de-
scent or sharp acceleration,
the speed limiter will not be
able to prevent the vehicle
from exceeding the programmed
speed.
In any event, the speed limiter cannot
replace the need to observe speed
limits, nor can it replace the need for
vigilance and responsibility on the
part of the driver.
To prevent the mat from becoming
caught under the pedals:
- ensure that the mat is positioned
correctly.
- never fit one mat on top of another.
Exceeding the programmed
speed
In exceptional circumstances, use
this mode to exceed the programmed
speed.
Pressing the accelerator in order to
exceed the programmed speed will
have no effect unless you press the
pedal
firmly
beyond the
point of re-
sistance
.
The limiter is deactivated temporarily
and the speed displayed on the instru-
ment panel flashes (e.g. at 70 mph
(110 km/h)):
Loading ...
Loading ...
Loading ...