Loading ...
Loading ...
Loading ...
87
BOOT LAYOUT
4. Rear armrests with
grab handle
5. Storage nets
One of them contains the luggage re-
taining net.
6. Luggage retaining net
fastenings ("hammock"
version) in the tailgate
Fold the net in two.
Secure the two centre hooks in the
stowing rings on the floor.
Secure the net’s remaining four
hooks on the boot pillars.
7. Load space cover
To install it:
- position one end of the cover roller
in the 2nd row,
- compress the opposite end of the
roller and position it,
- release it to allow it to engage,
- unroll the cover as far as the boot
pillars,
- insert the cover guides in the rails
in the pillars,
To remove it:
- remove the cover guides from the
pillar rails,
- return the cover into its roller,
- compress it and remove it from its
support at the 2nd row,
To store it, pull it back and place it
with the two storage nets, already
lowered.
Note:
the roller has two hooks for se-
curing the luggage retaining net de-
pending on where it is installed.
8. High load retaining net
9. Luggage retaining net
Secure the net’s seven hooks in the
stowing rings and the fastenings on
the floor.
See configuration of the nets (next
page)
1. Grab handles and coat hooks
2. High load retaining
net fastenings
The high load retaining net can be fit-
ted in the 2nd or 3rd row.
Open the covers of the correspond-
ing upper fastenings.
Fit the ends of the metal bar in these
fastenings.
Secure the two opaque material
strap hooks in the stowing rings on
the floor.
The rings are located directly below
the corresponding upper fastenings.
Pull the two straps taut.
Secure the two hooks on the elastic
parts of the opaque material in these
rings.
Note:
the net must be positioned so
that the label can be seen from the
boot. This ensures that the central
seat belt is routed correctly.
3. 12 volt socket
This is a 12 volt socket (lighter type),
installed on the load space cover left
support.
It is supplied from the "Running" po-
sition.
Loading ...
Loading ...
Loading ...