Loading ...
Loading ...
Loading ...
10
118
Detach the wheel/holder assem-
bly from the rear of the vehicle.
Take out the notched hook to re-
lease the wheel, as shown in the
illustration.
Removing the wheel
Slide the holder cover to gain ac-
cess to the tools.
If necessary, place a chock under
the wheel diagonally opposite to
the one to be changed.
Remove the trim, using the wheel-
brace
1
, pulling at the valve pas-
sage hole (for vehicles fitted with
steel wheels).
Loosen the wheel bolts (see §
"Special features of alloy wheels"
for vehicles fitted with alloy
wheels).
Note:
you can use the other end
of the tool
6
to unscrew the wheel
bolts.
Place the jack
4
in contact with one
of the four locating points
A
on the
sub-frame, the one which is clos-
est to the wheel to be changed.
Extend the jack
4
until its base is
in contact with the ground. Ensure
that the centre line of the base of
the jack is straight above the lo-
cating point
A
used.
Raise the vehicle
Remove one bolt and install the
centralising tool
5
in its place.
Unscrew the other bolts and re-
move the wheel.
Loading ...
Loading ...
Loading ...