Loading ...
Loading ...
Loading ...
104
This cruise control, of the new genera-
tion, is linked with the speed limiter. It
has a display on the instrument panel
to indicate the memorised reference
speed.
It enables the vehicle to maintain a
steady speed programmed by the
driver.
In order for it to be memorised or ac-
tivated, the vehicle speed must be
greater than 25 mph (40 km/h) with
at least fourth gear engaged for vehi-
cles fitted with a manual gearbox.
On vehicles fitted with an automatic
gearbox, the lever must be in posi-
tion
D
, or in at least second gear in
sequential mode.
When the cruise control function is
activated, pressing this button ena-
bles you to display the distance re-
corders.
After a few seconds or when this button
is pressed again, the display returns to
the cruise control function.
First activation/memorising a
reference speed
As soon as you reach the chosen
speed, press button
2
or
3
. This me-
morises the speed and the display in-
dicates (e.g. at 70 mph (110 km/h)):
Selecting the function
Place switch
1
in the
CRUISE
po-
sition. The cruise control is not yet
active and no speed has been me-
morised. The display indicates:
Note:
It is possible to accelerate
and drive momentarily at a speed
greater than the memorised speed.
The value memorised flashes. When
the accelerator pedal is released, the
vehicle will return to the memorised
speed.
Cancelling the cruise control
If you wish to cancel the cruise
control:
Press button
4
or the brake or
clutch pedal.
The display indicates (e.g. at 70 mph
(110 km/h)):
* According to country.
CRUISE CONTROL* Instrument panel display
Loading ...
Loading ...
Loading ...