Loading ...
Loading ...
Loading ...
Feature Description
6
(Cancel button): When it lights up, press to stop the current operation.
7
(Information button): Prints out a printer information page on the current status.
● If it is blinking white, press to conrm a connection attempt from other devices.
● If it is amber (possibly blinking), it indicates an HP Instant Ink warning or error. Press the button to print an
information page, check the HP Instant Ink section for diagnostic results, and then follow the instructions on
the page.
NOTE: HP Instant Ink service might be available in all countries. To check availability, visit hpinstantink.com.
Buttons on the back of the printer
(Power connection)
Use only the power cord supplied by HP.
(Power button)
Press to turn the printer on or o.
(USB port)
Use a USB cable to connect the printer to other devices.
(Wi-Fi button)
● Press to turn on or o the printer wireless capabilities of connecting to a wireless network
with a router or an access point.
● Press and hold for at least three seconds to restore the network settings to default settings.
This will also put the printer back into the Auto Wireless Connect (AWC) setup mode. The
printer must be in the AWC setup mode to connect to the HP Smart app and your network. For
more information, see Connect using the HP Smart app on page 25.
Button combinations
Function Button combination Instruction
Wi-Fi Auto Wireless Connect (AWC) network
reset
Press and hold the Wi-Fi button for at least three seconds
to restore the network settings to default settings. This
will also put the printer back into the Auto Wireless
Connect (AWC) setup mode.
Enter Wi-Fi Protected Setup (WPS) Push Button
mode
+
Press and hold the Wi-Fi button and Power button on the
back of the printer for three seconds.
Enter Wi-Fi Protected Setup (WPS) PIN mode
and print a page with PIN code
+
Press and hold the Information button for at least three
seconds to light all the buttons, then press the
Information and Resume buttons at the same time for
ve seconds.
Turn Wi-Fi Direct on or o
+ +
Press and hold the Information button for at least three
seconds to light all the buttons, then press the
Information, Cancel and Resume buttons at the same
time.
ENWW Buttons 5
Loading ...
Loading ...
Loading ...