Loading ...
Loading ...
Loading ...
Automated Pressure Calibrator
Maintenance
81
Maintenance
This section explains routine operator maintenance necessary to keep the
Product in optimal condition. For intensive maintenance tasks, such as
troubleshooting or repair, see the 2271A Service Manual. The Service Manual
also contains the calibration adjustment procedures. See the Contact Fluke
Calibration section for more information.
Clean the Exterior
To clean the Product, wipe it with a cloth that is lightly dampened with water or
mild detergent. Do not use aromatic hydrocarbons, chlorinated solvents, or
methanol-based fluids. To clean the display, use a soft cloth lightly dampened
with alcohol.
WCaution
Do not use aromatic hydrocarbons or chlorinated solvents for
cleaning. They can damage the plastic materials used in the
Product.
Fuse Replacement
Access the fuse from the rear panel. The fuse rating label below the fuse holder
shows the correct replacement fuse ratings for each operating voltage.
XWWarning
To prevent possible electrical shock, fire, or personal injury:
• Turn the Product off and remove the mains power cord.
Stop for two minutes to let the power assemblies discharge
before you open the fuse door.
• Use only specified replacement fuses, see Table 16.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...