FLUKE 2271A-N-G2M/BG200K User Manual for the Fluke 2271A-N-G2M/BG200K Pneumatic Pressure Calibrator Kit, 2MPa & 200kPa gauge

Loading ...

Automated Pressure Calibrator

Calibration Tasks

UUT

To configure the pressure device under test, push  and enter edit mode. The

following parameters are available.

Use UUT Tolerance: Yes/No

Select yes or no to use the UUT tolerance or not.

Threshold Tolerance:

Setting threshold tolerance value

Relative Tolerance:

Setting relative tolerance value

Combination Method:

Great of /Addition

Combine the Threshold Tolerance and Relative

Tolerance. At each pressure you would calculate the

threshold and the relative and use whichever is greater

or as addition.

New

Use New to make a new pressure device program.

Push  to select and name a new program. Put the correct value fill in the

column:

Start: The start pressure in the test sequence

End: The end pressure in the test sequence

Points Up: Determine the numbers of upscale.

Points Down: Determine the numbers of downscale.

Dwell Time:

See “Dwell Time” under the Transmitter section.

Max Time:

See “Max Time” under the Transmitter section.

Auto Fill:

See “Auto Fill” under the Transmitter section.

Delete

Select Delete to remove the selected program name. Push  to select and

delete.

Rename

Select Rename to change the name of a selected program. Push  to select

and Rename.

Push  to save the new program name.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 2271A-N-G2M/BG200K Pneumatic Pressure Calibrator Kit, 2MPa & 200kPa gauge