Loading ...
Loading ...
Loading ...
Automated Pressure Calibrator
Test Ports
31
VENT Port
The VENT port ties the internal volume to atmosphere when the Product is
vented.
Note
Leave the VENT port open to atmosphere to ensure proper Product
operation.
Test Ports
There are two test ports on top of the Product. Use these ports to connect UUTs
to the Product, CPS, or a P5532 filter.
HC20 and P3000 test port types are available. Choose the types of ports
necessary for the application. The P3000 and HC20 adapters and connections
are: M14, M20, 1/8 in, 1/4 in, 3/8 in, 1/2 in NPT and BSP. See Figure 4.
V
ENT
CO
N
T
ROL
ME
A
SU
R
E
mA
VDC
H
ART
7
89
4
5
6
1
2
3
0
L
O
C
K
S
AVE
UNL
OC
K
BACK
C
LEA
R
ENTRY
E
N
T
ER
S
ETUP
S
ETPOI
NT
F5
F
4
F3F2
F1
300
400
psi
500
600
200
100
0
hwr025.eps
Figure 4. Two Gauge Connection
Pressure instruments and UUTs are connected to the test ports on top of the
Product. Depending on the configuration of the Product ordered, one of two
hand-tight test port types are installed: P3000 or HC20. These are hand-tight
fittings that include necessary adapters to connect to most common size NPT,
BSP, and metric female test ports found on analog gauges and transmitters. For
a list of adapters, refer to Table 2 and for replacement adapters, contact Fluke
Calibration. When the HC20 style test port is used, a gauge with a male M20
connection can be connected directly to the test port without the use of an
additional adapter.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...