IDIS DR-6516P Operation Manual

Loading ...

Part 2 - Conguration

Firewall

Setting up a customized rewall rule set, it allows or

denies access such as specic MAC address, IP address

and receiving network port of the NVR.

Select Use Firewall to activate rewall function. Click

the + icon at the bottom of the list to set up a rewall

rule.

● Title: Edit the name of the rule.

● Type: Set the IP address, the MAC address or the

network port.

● Action: Select which actions to apply this rewall rule

to.

– Drop: Discard the packet that matches all the

specied conditions.

– Reject: Deny the packet that matches all the

specied conditions and send back an ACK packet

telling it that the "packet was dropped" to the

sender.

– Accept: Allow the packet that matches all the

specied conditions.

● Interface: Specify the ethernet interface. It refers to a

WAN (Network Client) or VIN (Video-In).

● Mac Address: If the rule is set to MAC address, enter

the sending MAC address

● IP: If the type of the rule is set to IPv4 or within the

IPv4 scope, enter the sending IP address.

● Port: If the type of the rule is set to port or within the

port scope, enter the receiving network port number

of NVR.

NAT

NAT function is to connect to the camera which is

internal VIN network from the physically divided WAN

network PC (WebSetup / IDIS Web / IDIS Center program

/ RTSP).

To connect to the camera WebSetup / IDIS Web / IDIS

Center program / RTSP function, you need to congure

the NAT rule to forward ports from NVR port number to

the camera port number.

Select Use NAT to activate NAT function. Click the + icon

at the bottom of the list to set up a NAT rule.

● Title: Edit the name of the rule.

● Type: Set the IP address, the MAC address or the

network port.

● Action: Select which actions to apply this NAT rule to.

– PORT_FORWARD: Allow the access by combining

an external TCP/UDP port with an internal port.

● Protocol: Set the network protocol to apply the rule

to.

● Interface: Specify the ethernet interface. It refers to a

WAN (Network Client) or VIN (Video-In).

● IP: If the type of the rule is set to IPv4 or within the

IPv4 scope, enter the sending IP address.

● Port: If the type of the rule is set to port or within the

port scope, enter the receiving network port number

of NVR.

It is not possible to set an interface from VIN to WAN

direction. For more information on NAT, refer to NAT

Conguration Guide on page 108.

Loading ...

IDIS DR-6516P DirectIP 6500 Series 16 Channel 4K Network Video Recorder

Operation Manual - Page 79