IDIS DR-6516P Operation Manual

Loading ...

Part 2 - Conguration

Video-Analytics_Trip Zone

● No.: Select which cameras to apply Trip Zone to.

● Sensitivity: Set daytime and nighttime sensitivity

settings between 1 (Low) and 5 (High).

● Zone: Dene the motion detection block.

Use the remote control’s arrow buttons to move the

block selection window up, down, left, and right. The

selection window consists of 8 blocks per row. Select/

deselect individual blocks using the Camera buttons.

You can use the mouse to drag the zone and then select,

clear, or reverse the selection.

From the zone selection screen, press the button

on the remote control or right-click on the mouse to

open up the Zone Setup menu.

– Select: Conrm the block selection in the selection

window.

– Clear: Clear the block selection in the selection

window.

– Reverse: Clear the blocks selected within the

selection window and select all unselected blocks

within the selection window.

– Select All: Select all blocks.

– Clear All: Clear all block selections.

– Reverse All: Clear all selected blocks within the

screen and select all unselected blocks within the

screen.

– Trip Direction: Dene in which direction the

motion has to occur in order for it to be considered

an event. Select In for movements from outside the

selection area in or Out for movements from inside

the selection area out.

– OK: Save the changes and exit the menu.

– Cancel: Exit the menu without saving the changes.

Loading ...

IDIS DR-6516P DirectIP 6500 Series 16 Channel 4K Network Video Recorder