IDIS DR-6516P Operation Manual

Loading ...

Part 2 - Conguration

Storage

Use this option to congure storage settings.

● Type: Indicates the type of the installed disk.

● Capacity: Indicates the disk’s capacity.

● Format: If the disk has been formatted, indicates

either Record or Not Using. If you have connected an

unformatted storage device, the Use As value will be

indicated as Not Formatted.

● Information: Indicates if the disk is being used for

recording purposes. Disks that were used in dierent

systems will show up as Other. Select Information

to check the saved data’s time information or select

Delete to erase the data.

• Select Format to prepare the disk as a storage for

data recording.

• Disks formatted with Use As set to Not Using will

not be used for data recording.

• This NVR supports SATA2 HDDs.

Mirror

The NVR supports function that records the same

data on the two disks at the same time. You can set up

mirroring by selecting Storage in the System menu and

then selecting Setup in the Mirror. Up to three Mirrors

are supported.

This function only works if the two internal hard disks

have the same capacity and model.

• If you change the setup related to Mirror, you must

reboot the system.

• A disk problem may cause mirroring to stop. The

separated disk can be used to reboot the system.

● Internal HDD: Indicates the available disks for

mirroring.

● Setup: Congure detailed settings related to Mirror.

– Mirror: Click OK to start mirroring. Once you start

mirroring (writing data on the two disks at the

same time between two disks), all existing data on

the two disks will be erased.

Once you start mirroring, all existing data on the two

disks will be erased. Please be careful not to designate

the wrong disk by mistake.

– Stop: Once mirroring starts, you can stop it by

selecting Stop option and then designating disks

to delete.

Mirror number 1 and 2 cannot resynchronize at the

same time.

● Information: Indicates if the installed disk is being

used for mirroring or Resync purposes. Select

information about mirroring to check the disk’s model

and serial number.

Mirror Conguration Error

● RAID Broken : When some of the HDDs that make up

mirroring are in error and then the defective HDDs are

replaced, the data cannot be recovered.

● Degrade : If the defective HDDs are replaced, the data

can be recovered by rebuilding the system. However,

performance may be degraded in this case.

Loading ...

IDIS DR-6516P DirectIP 6500 Series 16 Channel 4K Network Video Recorder

Operation Manual - Page 40