IDIS DR-6516P Operation Manual

Loading ...

108

NAT Function Example

NAT function is to connect to the camera which is internal VIN network from the physically divided WAN network PC

(WebSetup / IDIS Web / IDIS Center program / RTSP).

To connect to the camera WebSetup / IDIS Web / IDIS Center program / RTSP function, you need to congure the NAT

rule to forward ports from NVR port number to the camera port number.

NAT Conguration Guide

32EA

PC (WEB Setup / IDIS Web / IDIS

Center program / RTSP)

DirectIP™ Switch

NVR

WAN (Ethernet 0)

IP Address: 10.0.125.211

Getway: 10.0.0.1

VIDEO IN (Ethernet 1)

IP Address: 169.254.123.72

• To use NAT function, the camera gateway address must be set to the VIN network IP address of the NVR.

• For more information on the IP address of the camera and port number, refer to the WebSetup page of the camera

manual. Also, check the IP address of the camera in the NVR or default port number on the camera manual.

Part 5 - Appendix

Loading ...

IDIS DR-6516P DirectIP 6500 Series 16 Channel 4K Network Video Recorder