IDIS DR-6516P Operation Manual

Loading ...

Part 1 - Getting Started

Select Network Conguration and then click

Next. Select either Auto Conguration or Manual

Conguration and then click Test to test the system’s

current network conguration.

•

This test must be performed before proceeding

to the next step.

•

If the NVR is on a network connected to a

network that has a DHCP server, selecting Auto

Conguration retrieves LAN settings such as

IP and DNS addresses automatically. Selecting

Manual Conguration, on the other hand, lets

you specify the settings manually.

•

UPnP support device not found. If this error

message is displayed, check to see if the IP

router (or NAT) supports UPnP and if UPnP has

been enabled. For more information about the

router's UPnP function, refer to the router's

operation manual.

Enter in the Device Name eld the NVR name to be

registered on the FEN server and then click Check to

check its availability.

•

The device name you register on the FEN server

will be a unique name used to identify the

NVR. Once registered, the name can be used

to access the NVR directly from clients such as

the IDIS Center. Check the name's availability

to complete the registration process. The Finish

button will then become activated.

•

You will be prompted with an error message if

you do not enter a name for the NVR or enter a

name already registered on the FEN server.

•

Depending on the network environment,

FEN services may not be active and therefore

prevent the NVR from connecting to the

network. In this case, you will need to manually

congure the ports.

Click Finish to exit Network Wizard.

Loading ...

IDIS DR-6516P DirectIP 6500 Series 16 Channel 4K Network Video Recorder