IDIS DR-6516P Operation Manual

Loading ...

Part 2 - Conguration

Remote Control

● Port: Select None, RS232 or RS485. Click the Setup

button and then select the correct Baud Rate,

Parity, Data Bits and Stop Bits for the device you are

connecting to the NVR. You can select the device from

the Remote Control Product list. If the RS232 port

and RS485 port are in use for PTZ control, networking

or text input, the remote keyboard cannot be

congured. A warning message window will appear

when other devices are using the same port, such as

PTZ control, networking or text input. The message

warns that you cannot use another device because

the ports overlap.

Network Setup

Refer to the Menu Use on page 32 for basic

information on using the Setup menus.

General

● Remote Audio Channel: Transmits the selected

channel’s audio to the remote program. Select Select

From Client to stream audio of the channel selected

on the remote program.

Audio skipping and sync issues can occur under poor

network conditions.

● Enable SSL for Transferring Data: Applies SSL

(Secure Sockets Layer) protection on remote viewing

and recording data transmissions.

• If using the SSL feature, it will not be possible to

connect to the NVR from a remote program or a

network keyboard that does not support SSL.

• Changing the SSL setting temporarily severs all

remote connections to the NVR in order to apply the

change.

• This product contains content developed by

OpenSSL Project for use in Open SSL Toolkit (http://

www.openssl.org/).

● Network Bandwidth Limit: Congure the network

bandwidth sent to the remote lccale.

– Bitrate: Set the size of the bandwidth.

– Burst: Set the burst-byte or buer byte size.

– Latency: Set the latency.

– MTU: Set the maximum transmission unit (MTU).

If you congured Network Bandwidth Limit, the live

video may not display smoothly in a remote program.

Loading ...

IDIS DR-6516P DirectIP 6500 Series 16 Channel 4K Network Video Recorder