IDIS DR-6516P Operation Manual

Loading ...

Part 2 - Conguration

● White LED Mode: Clicking on/o enables or disables

White LED lighting when motion is detected by the

PIR sensor. Also clicking auto allows the system to

enable/disable White LED mode automatically.

● Pivot: Enable this option and choose the direction of

the pivot. You can turn the image by 90 degree in the

clockwise or counterclockwise direction. This feature

is particularly eective when monitoring hallways,

passages, and other conned spaces.

● Defog: Disables or enables the Defog feature. When it

is enabled, image with a fog is adjusted.

● IR Strength: Adjust the IR LED’s brightness level.

Select a brightness level manually between 0%

(darkest) and 100% (brightest). Selecting Auto(Smart

IR) allows the system to control the IR LED's brightness

level automatically.

● Smart IR: Help solve the problem of infrared LEDs

whiting out images, such as people's faces, when they

are too close to the IR LEDs of a night vision camera.

In this case, the image is adjusted through AE control.

● Advanced AE Mode: Select desired setup mode

between Normal and Number-Identication. In

Number-Identication mode, when a certain area

of images is too bright due to backlight under low

lighting conditions and it causes the other area to

be too dark, this function provides the other area of

images brightly and clearly by blocking the backlight

in the certain area. Dark parking lot entrances and

gas station entrances at night, for example (Local

Exposure compensates for the bright light coming

from incoming vehicle headlights and makes it

possible to see the license plates). When setting to

the Number-Identication mode, some option

settings will be adjusted automatically, and you

cannot change them as long as the Setup Mode is not

changed.

● Mirror: Select Horizontal or Vertical to ip the image

horizontally and/or vertically.

Select Apply after setting up a camera to see images

from the concerned camera on the left side of the

screen. Selecting Apply or OK displays a popup screen

that indicates whether the camera has been set up

successfully or not.

White Balance Options

● Preset: Use precongured white balance settings.

– Auto: Allow the system to adjust the white

balance automatically. The system will assess the

lighting conditions and adjust the white balance

automatically.

– Incandescent - Fluorescent Cold: Select a lighting

type to apply the appropriate white balance.

● Manual: Adjust the white balance manually. Adjust

Red and Blue gain values. Greater the value, greater

the intensity of the corresponding color.