Loading ...
Loading ...
Loading ...
Part 2 - Conguration
62
Camera System
A list of events that occur in the camera except for video
analysis.
Camera System_Audio Detection
● Activation Time: Specify how long audio detection
has to last in order for it to be considered as an event.
When the audio detection is not detected for the
specied duration of time, it will not be considered as
an event.
● No.: Select which cameras to apply Audio Detection
to.
● Sensitivity: Set to between 1 (Low) and 5 (High).
● Activation Time: Specify how long audio detection
has to last in order for it to be considered an event.
Audio detections that do not last for the specied
duration of time will not be considered as events.
● Actions: Specify which actions to take when audio
detection events occur.
– Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
– Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
– Notify: Congure to be notied of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
– PTZ: Moves the PTZ camera to a specic preset
position when an event occurs.
– Event Monitoring: Selects the cameras to monitor
when an event occurs.
In order to use the Callback feature, the NVR must be
registered on the remote program.
● Ignoring Interval: The system does not produce
event log entries or issues remote notications
regarding audio detected during the specied time
following the initial audio detection. Set a value
between 1 sec and 5 secs or choose Never.
● Use Ignoring Time: Select Time Setup to specify the
audio detection ignore time. Audio detection will be
disabled during the specied time frame.
Loading ...
Loading ...
Loading ...