IDIS DR-6516P Operation Manual

Loading ...

Part 2 - Conguration

Camera System_Video Loss

● Activation Time: Specify how long video loss has

to last in order for it to be considered as an event.

When the video loss is not detected for the specied

duration of time, it will not be considered as an event.

● Actions: Specify which actions to take when a Video

Loss event occurs.

– Record: Specify which cameras to begin linked

recording on when an event occurs. If the schedule

is set to Event or Time & Event mode, the selected

cameras will begin linked recording when an event

occurs.

– Alarm-Out: Designate event-triggered alarm-out

channels (each for the NVR and camera) and beeps.

– Notify: Congure to be notied of events by Mail,

LAN1 through 5, Push, HTTP, FTP, and/or Alert

Window.

– PTZ: Moves the PTZ camera to a specic preset

position when an event occurs.

– Event Monitoring: Selects the cameras to monitor

when an event occurs.

In order to use the Callback feature, the NVR must be

registered on the remote program.

● Ignoring Interval: The system does not produce

event log entries or issue remote notications for

video loss detected for the time specied after the

initial video loss was detected. Set the value between

0.1 and 15 seconds or choose Never. This is supported

only when video encoders are connected.

● Use Ignoring Time: Select Time Setup to specify

the time to ignore video loss detection. Video loss

detection will be disabled for a specied time period.

This is supported only when video encoders are

connected.

Camera System_Recording Fail

● Activation Time: Specify how long recording fail

has to last in order for it to be considered as an

event. When the recording fail is not detected for the

specied duration of time, it will not be considered as

an event.

● Actions: Specify which actions to take when a

Recording Fail event occurs.