Loading ...
Loading ...
Loading ...
Part 2 - Conguration
69
Additional Event_Alarm-In
● No.: Enable / disable alarm-ins.
This option includes both local and network camera
alarm-ins. 1 through 16 are network camera alarm-ins,
whereas 17 through 20 are local alarm-ins.
● Source: Specify the device to use for Alarm-In event.
– Channel: Set the channel of the source you set.
– Sub Channel: Set the sub channel of the source
you set.
● Title: Use the virtual keyboard to enter titles.
● Type: Change the alarm-in type.
● Alarm-In - Condition: When a specic event occurs,
you can set the condition that determines whether
to operate motion according to the status of other
events.
– Reference Only: Set the event to be the subject of
a reference.
– Event: Set the reference event.
– Channel: Set the reference channel.
● Actions: Specify which actions to take when Alarm-In
is detected.
– Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
– Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
– Notify: Congure to be notied of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
– PTZ: Moves the PTZ camera to a specic preset
position when an event occurs.
– Event Monitoring: Selects the cameras to monitor
when an event occurs.
• In order to use the Callback feature, the NVR must
be registered on the remote program.
• Select Panic Record to specify which alarm-in
channels to use. Panic Record commences when
the corresponding alarm-in occurs and terminates
when the alarm-in is deactivated.
Loading ...
Loading ...
Loading ...