Loading ...
Loading ...
Loading ...
Part 2 - Conguration
41
Self-Diagnosis
Use this option to congure self-diagnostic settings.
This feature is also supported when connected to the
NVR from a remote program.
● Reports
– No.: Selects which reports to export.
– Time: Displays when you started the self-diagnosis.
– View a Report: Briey displays whether the report
is “Good” or “Bad”.
– : Click the + icon at the bottom left corner of
the screen to run the self-diagnosis.
– Export: Saves the Saves the reports to a storage
device, such as the USB port and NetFS site, by
converting them to HTML format. You can export
more than one report at a time by selecting
multiple reports.
● Set up Auto Generating Interval and Check IP
Duplicate.
– Auto Generating Interval: Select any time period
between 6 hours and 7 days.
– Check IP Duplicate: Check the IPs of the WAN, VIN,
and Camera are network-specic.
• These settings can be periodically checked for IP
duplication, but Camera IP duplication checks have
a long verication cycle, so you can check the results
immediately after self-diagnosis.
• Camera IP duplication checks only the VIN network.
• The reports are stored in up to 24 les. If you have
congured Auto Generating Interval as one-day
period, only the reports from the last 24 days can be
viewed.
• If the NVR is turned o, the reports will
automatically turn o.
• The reports are organized by recent date and time.
● FailOver: When a problem is detected on the target
device, click the Run the failover button to resolve
the problem.
– Target Device.: Selects which device to run the
failover.
– Channels: Select the camera channel if a camera is
set to the target device.
– Action: Select the type of action to run the failover.
– Run the failover: Click the Run the failover
button when a fail is detected on the target device
to resolve the problem.
Once Run the failover have made to the camera, the
camera will reboot automatically.
Loading ...
Loading ...
Loading ...