IDIS DR-6516P DirectIP 6500 Series 16 Channel 4K Network Video Recorder

Operation Manual - Page 24

For DR-6516P. Series: 6500 Serie
Also, The document are for others IDIS models: DR-6508P, DR-6532P

PDF File Manual, 112 pages, Read Online | Download pdf file

DR-6516P photo
Loading ...
Loading ...
Loading ...
Part 1 - Getting Started
24
1 Login/Logout
Log into and out from accounts. If in the logged in
state, the account ID is shown. If in the logged out
state, the login icon is shown.
2 Layout
Used to change the screen layout to single screen,
1x2, corridor format(1x3), 2x2,1+5, 1+7, 3x3, 1+12,
4x4, 5x5, or 6x6.
Corridor Format: Divides the screen into
3 panes. This format displays vertically and
is set to display the optimized video of
the camera when using the cameras pivot
feature. This is particularly eective when
monitoring hallways, passages, and other
conned spaces.
3 Previous/Next Group
Loads the previous/next screen group.
4 Display
Full Screen On: Display the screen with a 16:9
aspect ratio. When you place the mouse at
the bottom of the screen, the interface screen
related to playback will appear. Refer to detailed
explanations on the next page.
Full Screen O: Display Time-Lapse Search screen.
Camera OSD On/O: Enables/ disables the camera
OSD feature.
Status OSD On/O: Enables/ disables the status
OSD feature.
Aspect Ratio On/O: Setting On displays video on
the camera screen in its original ratio.
5 Freeze
Freezes the screen. Select Freeze again to unfreeze.
6 Alarm
Pressing this button while the alarm has been
activated resets all NVR outputs, including the built-in
buzzer. When an event occurs, the button is enabled.
Press the button to turn o the alarm and deactivate
it.
7 Panic Recording
Activates/deactivates Panic Recording.
8 Sequence
Initiates Sequence in the same manner as pressing
the SEQUENCE button while in Live mode. To exit,
select Sequence once more or press the SEQUENCE
button on the remote control. The icon is
displayed on the upper right part of the screen while
Sequence is in progress.
Full Sequence
Displays all channels in sequence while in Live mode
(single and split screen settings). In order to use the Full
Sequence feature, Full Sequence (Display Setup - Main
Monitor > Sequence) must rst be enabled.
e.g.) Full Sequence in 2x2 split screen mode
1 5 9 29 1
3 7 11 31 3
2 6 10 30 2
4 8 12 32 4
Loading ...
Loading ...
Loading ...