Loading ...
Loading ...
Loading ...
Part 2 - Conguration
70
Additional Event_Text-In
● Setup: Congure text-in devices.
• It's possible to batch congure all text-in devices
with the exception for port settings.
• An inux of large amounts of text-in data from
multiple channels can hinder system performance.
● Text-In Product: The setup window is updated so
that the portion below the port setting matches the
corresponding text-in device. Displayed screenshot
illustrates Generic Text settings.
● Transaction Start: Once Transaction Start has been
designated, the system will recognize the specied
string as the beginning of a transaction. You can
choose the Any Character setting. Under this setting,
any character will trigger the system into recognizing
the start of a new transaction.
● Transaction End: Once Transaction End has been
designated, the system will recognize the specied
string as the end of a transaction. Select 0 more
line(s) next to Transaction End and specify a value
between 1 and 10. The system will recognize the
specied Transaction End string plus the number of
lines as being the end of a transaction.
● Line Delimiter: Designate a string to mark the end of
a line. You can enter control strings by selecting
and then entering ^, followed by a letter. For example,
Carriage Return is ^M and Line Feed (new line) is ^J.
● Ignore String: Specify a string to ignore from
transaction records.
● Case Sensitive: Ignores case in strings designated
under Transaction Start, Transaction End, Line
Delimiter, and Ignore String.
Case Sensitive does not apply to control strings.
● Time Out: Once Time Out has been enabled, the
system will assume the end of a transaction if no new
string is entered within the specied duration of time.
Select between 5 secs and 15 mins.
Selecting RS-232, RS-485, USB-Serial 1 through 8, or LAN
1 through 16 as the port activates the Port Setup button.
Select Setup and congure the Baud Rate, Data Bit,
Stop Bit, and Parity settings.
• If any one of LAN1 through 16 has been selected as
the port, select the Port Setup button and congure
the network port setting.
• If using a USB-serial port, the Text-In feature may
malfunction if the USB cable is removed while the
system is in operation.
● Title: Designate a name for the text-in device.
● Actions: Specify which actions to take when text-in is
detected.
– Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
– Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
– Notify: Congure to be notied of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
– PTZ: Moves the PTZ camera to a specic preset position
when an event occurs.
– Event Monitoring: Selects the cameras to monitor when
an event occurs.
In order to use the Callback feature, the NVR must be
registered on the remote program.
Loading ...
Loading ...
Loading ...