Loading ...
Loading ...
Loading ...
21
OPERATION
M. 4WAY CHUTE ROTATION CONTROL IF EQUIPPED
The 4-Way chute rotation control is located on the left side of the
dash panel.
• To change the direction in which snow is thrown, squeeze
the button on the control and rotate to the right or to the left
(Figure 61).
• To change the distance which snow is thrown, move the
control forward or backward.
Figure 61
N. ELECTRIC CHUTE PITCH & ROTATION CONTROL
JOYSTICK IF EQUIPPED
The electric chute control is located on the right side of the dash
panel (Figure 62).
• To change the direction in which snow is thrown, move the
joystick to the right or to the left.
• To change the distance which snow is thrown, move the
joystick forward or backward.
Figure 62
O. MANUAL CHUTE ROTATION CONTROL & ELECTRIC CHUTE
CONTROL JOYSTICK IF EQUIPPED
Follow this procedure to manually change the chute direction
on models equipped with an electric chute control (joystick) and
manual chute rotation control rod only (Figure 64).
1. Remove cotter pin (a) from either of the holes furthest from
the chute assembly on chute control head (Figure 63).
a
a
Figure 63
2. Push in chute control rod until the hole in it lines up with the
third hole in chute control head (Figure 63).
3. Reinsert cotter pin (a) through this hole and chute control
rod (Figure 63).
J. OVERHEAD CHUTE ROTATION CONTROL IF EQUIPPED
The overhead chute rotation control is located at the rear of the
snow blower under the handle panel. To change the direction in
which snow is thrown, rotate the control (Figure 58).
Figure 58
K. CHUTEPITCH CONTROL IF EQUIPPED
The two-way chute-pitch control is located on the left side of the
dash panel and is used to raise and lower the upper chute, which
will change the distance the snow is thrown.
To raise or lower the upper chute, move the lever forward or
backward (Figure 59).
Two-Way Chute-Pitch Control
• To Reduce the Distance Snow is Thrown: Move the lever
forward to tilt the upper chute down (Figure 59).
• To Increase the Distance Snow is Thrown: Move the lever
rearward to tilt the upper chute up (Figure 59).
Two-Way Indexed Chute-Pitch Control
• To Reduce the Distance Snow is Thrown: Disengage lever
from the current chute setting. Move the lever forward to tilt
the upper chute down to the desired setting (a) (Figure 59).
• To Increase the Distance Snow is Thrown: Disengage lever
from the current chute setting. Move the lever rearward to
tilt the upper chute up to the desired setting (b) (Figure 59).
TWO-WAY INDEXED CHUTE-PITCH CONTROL
CHUTE TILT
DOWN
CHUTE TILT
UP
a
b
TWO-WAY CHUTE-PITCH CONTROL
Figure 59
L. 2WAY CHUTE ROTATION CONTROL IF EQUIPPED
The 2-Way chute rotation control is located on the left side of the
dash panel.
• To change direction in which snow is thrown, squeeze button
on control and rotate to the right or to the left (Figure 60).
Figure 60
Loading ...
Loading ...
Loading ...