Loading ...
Loading ...
Loading ...
View Arming Task
Go to VCA → Set Applicaon → ITS (Intelligent Transportaon System) → Vehicle Arming →
Arming Status to view the arming tasks sent from the
plaorm.
The device performs a single task at one me. If it receives mulple tasks, former tasks are
interrupted and the device performs the latest task.
3.8.5 Advanced Sengs
You can set the advanced sengs according to your need to get beer vehicle arming eect.
Advanced Parameters
Go to VCA → Set Applicaon → ITS (Intelligent Transportaon System) → Advanced Sengs →
Advance to set the following parameters.
License Plate Thumbnail
If the device recognizes a license plate, an
addional thumbnail of the license plate is uploaded.
Tuning Mode
The tuning mode is for professional technicians. It is not recommended to other users as it may
aect the live view image.
Target Informaon
When target informaon is enabled, the target is highlighted with a frame in the video.
Rule Informaon
When rule informaon is enabled, the rule frames (for example, detecon areas) show in the
video.
Capture No Plate Vehicle
When this
funcon is enabled, the device captures and uploads vehicle pictures with or without
license plate. If it is not enabled, only pictures of vehicles with license plate are uploaded.
Dwell Time aer Failed Tracking
The me the device stays at the posion where the target tracking fails.
Report Interval of Tracking Info
The alarming informaon upload interval during tracking.
Wait to Stop Tracking If Low Validity
The validity is an internal parameter that helps judge whether the device should keep tracking
or not. This parameter is the
waing me level before the device stops tracking when the
validity is low. Larger value means longer waing me.
Wait to Lower Tracking Speed If Low Validity
Network Speed Dome User Manual
35
Loading ...
Loading ...
Loading ...