Loading ...
Loading ...
Loading ...
Batch Modeling Select a face picture library, and click Batch Modeling.
6.
Oponal: Repeat to create more face libraries.
3.5.2 Set Face Picture Comparison
The funcon compares captured pictures with face pictures in the library and outputs comparison
result. Comparison result can trigger certain
acons when arming schedule and linkage method are
set.
Before You Start
You should
rst create at least one face picture library and add face pictures. See Set Face Picture
Library .
Note
For face comparison, the faces captured in a certain face picture library will be compared with the
data in all face libraries.
Steps
1.
Go to VCA → Face Comparison → Set
Applicaon → Comparison and Modeling .
2.
Check Enable.
3.
Select a face picture library as the reference.
4.
Select desired face
informaon to upload.
5.
Select a face comparison mode.
Best
Comparison
The device captures and compares the target face connuously when the
face target stays in the detecon area, and upload the best scored face
picture and related alarm informaon when the target face leaves the area.
Quick
Comparison
The device capture and compares the target face when the face grading
exceeds the set Face Grading Threshold for Capture.
Face Grading Threshold for Capture
The face grading threshold for the device to judge whether to capture and
upload the face or not.
Max. Capture Interval
The max. interval between two captures when the target is in the
detecon area. The camera takes the capture when it reaches the max.
interval even if the face grading does not reach the set threshold.
Quick Setup Mode
Custom, Face Aendance, and Face Recognion are selectable. Select
according to actual using scenarios. In custom mode, you can set
Comparison Timeout and Comparison Times.
6.
Click to set arming schedule for the selected face library. Set arming schedule. See Set Arming
Schedule .
Network Speed Dome User Manual
19
Loading ...
Loading ...
Loading ...