Loading ...
Loading ...
Loading ...
The content of the Settings tab is determined by the selected hardware, and varies
depending on the type of hardware. For some types of hardware, the Settings tab
displays no content at all or read-only content.
For information about the Settings tab for remote servers, see Settings tab (remote server) on page 412.
PTZ tab (video encoders)
On the PTZ tab, you can enable PTZ (pan-tilt-zoom) for video encoders. The tab is available if the selected
device is a video encoder or if the driver supports both non-PTZ and PTZ cameras.
You must enable the use of PTZ separately for each of the video encoder's channels on the PTZ tab before you
can use the PTZ features of the PTZ cameras attached to the video encoder.
Not all video encoders support the use of PTZ cameras. Even video encoders that
support the use of PTZ cameras may require configuration before the PTZ cameras can
be used. It is typically the installation of additional drivers through a browser-based
configuration interface on the device's IP address.
PTZ tab, with PTZ enabled for two channels on a video encoder.
Client node
Clients (node)
This article describes how to customize the user interface for operators in XProtect Smart Client and for system
administrators in the Management Client.
Administrator manual | XProtect® VMS 2023 R1
446 | User interface details
Loading ...
Loading ...
Loading ...