Loading ...
Loading ...
Loading ...
1. Do one of the following:
l
To add an ST server, right-click the Axis Secure Tunnel Servers top node, select Add Axis Secure
Tunnel Server
l
To edit an ST server, right-click it, select Edit Axis Secure Tunnel Server
2. In the window that opens, fill in the relevant information.
3. If you chose to use credentials when you installed the Axis One-Click Connection Component, select
the Use credentials check box and fill in the same user name and password as used for the Axis One-
Click Connection Component.
4. Click OK.
Register new Axis One-Click camera
1. To register a camera under an ST server, right-click it and select Register Axis One-Click Camera.
2. In the window that opens, fill in the relevant information.
3. Click OK.
4. The camera now appears under the relevant ST server.
The camera can have the following color coding:
Color Description
Red Initial state. Registered, but not connected to the ST server.
Yellow Registered. Connected to the ST server, but not added as hardware.
Green Added as hardware. May or may not be connected to the ST server.
When you add a new camera, its status is always green. The connection status is reflected by Devices on
Recording Servers in the Overview pane. In the Overview pane, you may group your cameras for an easier
overview. If you choose not to register your camera at the Axis dispatch service at this point, you can do so
later from the right-click menu (select Edit Axis One-Click Camera).
Smart maps
Geographic backgrounds (explained)
Before a user of XProtect Smart Client can select a geographic background, first you must configure the
geographic backgrounds in XProtect Management Client.
Administrator manual | XProtect® VMS 2023 R1
304 | Configuration
Loading ...
Loading ...
Loading ...