Loading ...
Loading ...
Loading ...
To configure your system:
1. On the central site, expand Servers and select Recording Servers.
2. In the Overview pane, expand the required recording server, select the relevant remote system. Select
the relevant remote server.
3. In the Properties pane, select the Remote Retrieval tab and update the settings (see Remote Retrieval
tab on page 412).
If the network fails for some reason, the central site misses out on recording sequences. You can configure
your system to let the central site automatically retrieve remote recordings to cover the down-period, once the
network is reestablished.
1. On the central site, expand Servers and select Recording Servers.
2. In the Overview pane, expand the required recording server, select the relevant remote system. Select
the relevant camera.
3. In the Properties pane, select the Record tab, and select the Automatically retrieve remote recordings
when connection is restored option (see Save and retrieve remote recording).
4. In the toolbar, click Save.
As an alternative, you can use rules or start remote recording retrievals from XProtect Smart Client when
needed.
In a Milestone Interconnect setup, the central site disregards privacy masks defined in a remote site. If you
want to apply the same privacy masks, you must redefine it on the central site.
Configure your central site to respond to events from remote sites
You can use events defined on the remote sites to trigger rules and alarms on your central site and thereby
respond immediately to events from the remote sites. This requires that the remote sites are connected and
online. The number and type of events depend on the events configured and predefined in the remote sites.
The list of supported events is available on the Milestone website (https://www.milestonesys.com/).
You cannot delete predefined events.
Requirements:
l
If you want to use user-defined/manual events from the remote sites as triggering events, you must
first create these on the remote sites
l
Make sure that you have an updated list of events from the remote sites (see Update remote site
hardware on page 300).
Administrator manual | XProtect® VMS 2023 R1
301 | Configuration
Loading ...
Loading ...
Loading ...