Loading ...
Loading ...
Loading ...
The number of seconds you specify must be sufficiently large to accommodate your requirements in the
various recording rules you define.
If you change the location to Memory, the system reduced the period to 15 seconds automatically.
Use pre-buffer in rules
When you create rules that trigger recording, you can select that recordings should start some time before the
actual event (pre-buffer).
Example: The below rule specifies that recording should start on the camera 5 seconds before motion is
detected on the camera.
To use the pre-buffer recording function in the rule, you must enable pre-buffering on
the device being recorded and you must set the pre-buffer length to at least the same
length as specified in the rule.
Monitor the status of databases for devices
1. In the Site Navigation pane, select Devices.
2. Select the relevant device in the Overview pane and select the Recording tab.
Under Storage, you can monitor and manage the databases for a device or a group of devices added to the
same recording server.
Above the table, you can see the selected database and its status. In this example, the selected database is the
default Local Default and the status is Recordings also located on other recording servers. The other server
is the recording server in building A.
Administrator manual | XProtect® VMS 2023 R1
224 | Configuration
Loading ...
Loading ...
Loading ...