Loading ...
Loading ...
Loading ...
Specifying multiple filter criteria
You can specify multiple filter criteria and thereby further narrow your filtering of the device tree. When the
filter is applied, all defined filter criteria are considered to be co-joined with an AND, meaning they are
cumulative.
For example, if you have entered two filter criteria: “Camera” and “Warehouse”, the list will display all devices
that contain the words “Camera” and “Warehouse” in the device name but will not display devices that contain
the words “Camera” and “Parking Lot” in the device name nor will devices that only contain the word "Camera"
in the device name be displayed.
Remove each individual filter criteria from the filter field to broaden your filter if you have specified a filter that
is too restrictive. The filter is automatically applied to the device tree when removing filter criteria.
Resetting the filter
If you remove all filter criteria from the filter field, the Overview pane is reset and will display all devices once
again.
You can also press F5 to reset the filter and clear the Show disabled devices check box.
Disabled devices
Disabled devices are by default not displayed in the Overview pane.
To display all disabled devices, in the top of the Overview pane, click Filter to open the Filter tab and select
Show disabled devices.
To hide disabled devices again, clear Show disabled devices.
Failover servers
Set up and enable failover recording servers
If you have disabled the failover recording server, you must enable it before it can take
over from the standard recording servers.
Do the following to enable a failover recording server and edit its basic properties:
1. In the Site Navigation pane, select Servers > Failover Servers. This opens a list of installed failover
recording servers and failover groups.
2. In the Overview pane, select the required failover recording server.
3. Right-click and select Enabled. The failover recording server is now enabled.
4. To edit failover recording server properties, go to the Info tab.
Administrator manual | XProtect® VMS 2023 R1
200 | Configuration
Loading ...
Loading ...
Loading ...