Loading ...
Loading ...
Loading ...
Remove a recording server
If you remove a recording server, all configuration specified in the Management Client is
removed for the recording server, including all of the recording server's associated
hardware (cameras, input devices, and so on).
1. Right-click the recording server you want to remove in the Overview pane.
2. Select Remove Recording Server.
3. If you are sure, click Yes.
4. The recording server and all of its associated hardware are removed.
Delete all hardware on a recording server
When you delete hardware, all recorded data related to the hardware is deleted
permanently.
1. Right-click the recording server on which you want to delete all hardware.
2. Select Delete All Hardware.
3. Confirm the deletion.
Changing the host name of the management server computer
If the management server is addressed by its fully qualified domain name (FQDN) or its host name, a change to
the host name of the computer will have implications within XProtect that must be considered and dealt with.
In general, a change of the host name of a management server should be planned for
carefully due to the amount of clean-up that might be required afterwards.
In the following sections you can get an overview of some of the implications of a change of a host name.
The validity of certificates
Certificates are used to encrypt communication between services, and the certificates are installed on all the
computers that run one or more of the XProtect services.
Depending on how certificates are created, they can be related to the computer they are installed on, and they
will only be valid as long as the computer name stays the same.
For more information about how to create certificates, see Introduction to certificates.
Administrator manual | XProtect® VMS 2023 R1
343 | Maintenance
Loading ...
Loading ...
Loading ...