Loading ...
Loading ...
Loading ...
Move non-archived recordings from one storage to another
You move recordings from one live recording database to another from the Record tab of the device.
1. Select the device type. In the Overview pane, select the device.
2. Click the Record tab. In the upper part of the Storage area, click Select.
3. In the Select Storage dialog box, select the database.
4. Click OK.
5. In the Recordings Action dialog box, select if you want to remove already existing - but non-archived -
recordings to the new storage or if you want to delete them.
6. Click OK.
Assign failover recording servers
On the Failover tab of a recording server, you can choose between three types of failover setups:
l
No failover setup
l
A primary/secondary failover setup (cold standby)
l
A hot standby setup
If you select b and c, you must select the specific server/groups. With b, you can also select a secondary
failover group. If the recording server becomes unavailable, a failover recording server from the primary
failover group takes over. If you have also selected a secondary failover group, a failover recording server from
the secondary group takes over in case all failover recording servers in the primary failover group are busy. In
this way, you only risk not having a failover solution in the rare case when all failover recording servers in the
primary, as well as in the secondary, failover group are busy.
1. In the Site Navigation pane, select Servers > Recording Servers. This opens a list of recording servers.
2. In the Overview pane, select the wanted recording server, go to the Failover tab.
3. To choose failover setup type, select between:
l
None
l
Primary failover server group/Secondary failover sever group
l
Hot standby server
You cannot select the same failover group as both primary and secondary failover group nor select
regular failover servers already part of a failover group as hot standby servers.
4. Next, click Advanced failover settings. This opens the Advanced Failover Settings window, listing all
devices attached to the selected recording server. If you selected None, the advanced failover settings
are also available. The system keeps any selections for later failover setups.
Administrator manual | XProtect® VMS 2023 R1
196 | Configuration
Loading ...
Loading ...
Loading ...