Loading ...
Loading ...
Loading ...
When you enable it, specify a recording time. The number of minutes you specify must be sufficiently large to
accommodate the requirements of the various manual recordings without overloading the system.
Add to roles:
You must grant the permission to start and stop manual recording to the client users on each camera in Roles
on the Device tab.
Use in rules:
The events you can use when you create rules related to manual recording are:
l
Manual Recording Started
l
Manual Recording Stopped
Specify recording frame rate
You can specify the recording frame rate for JPEG.
1. In the Site Navigation pane, select Devices.
2. Select the relevant device in the Overview pane.
3. On the Record tab, in the Recording frame rate: (JPEG) box, select or enter the recording frame rate (in
FPS, frames per second).
Enable keyframe recording
You can enable keyframe recording for MPEG-4/H.264/H.265 streams. It means that the system switches
between recording keyframes only and recording all frames depending on your rule settings.
You can, for example, let the system record keyframes when there is no motion in the view and switch to all
frames only in case of motion detection to save storage.
1. In the Site Navigation pane, select Devices.
2. Select the relevant device in the Overview pane.
3. On the Record tab, select the Record keyframes only check box.
4. Set up a rule that activates the function, see Actions and stop actions.
Administrator manual | XProtect® VMS 2023 R1
219 | Configuration
Loading ...
Loading ...
Loading ...