Loading ...
Loading ...
Loading ...
Name Description
of the ST server.
User name (for Dispatch
Server)
Enter a user name. The user name must be identical to the one received from
your system provider.
User name (for ST
server)
Enter user name. Must be identical to the one entered when the Axis One-
Click Connection Component was installed.
Servers node
Servers (node)
This section describes how to install and configure recording servers and failover recording servers. You also
learn how to add new hardware to the system and interconnect other sites.
l
Recording Servers (Servers node) on page 393
l
Failover Servers (Servers node) on page 406
Recording Servers (Servers node)
The system uses recording servers for recording of video feeds, and for communicating with cameras and
other devices. A surveillance system typically consists of several recording servers.
Recording servers are computers where you have installed the Recording Server software, and configured it to
communicate with the management server. You can see your recording servers in the Overview pane when
you expand the Servers folder and then select Recording Servers.
Backward compatibility with recording server versions older than this version of the management server is
limited. You can still access recordings on recording servers with older versions, but if you want to change their
configuration, make sure they match this version of the management server. Milestone recommends that you
upgrade all recording servers in your system to the same version as your management server.
Administrator manual | XProtect® VMS 2023 R1
393 | User interface details
Loading ...
Loading ...
Loading ...