Loading ...
Loading ...
Loading ...
Connect to a wireless network with a router
TIP: To print the Wireless Quick Start Guide, press and hold until all the buttons on the control panel
light up, and then press again.
●
Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS)
●
Connect your printer to a wireless network using HP printer software
Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS)
Before you can connect your printer to a wireless network using WPS, make sure you have the following:
● A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point.
NOTE: The printer only supports connections using 2.4 GHz and 5 GHz.
● A computer connected to the wireless network that you intend to connect the printer to. Be sure you
have installed the HP printer software on the computer.
If you have a WPS router with a WPS push button, follow the Push Button method. If you are not certain your
router has a push button, follow the PIN method.
To use the Push Button Conguration (PBC) method
1. Press and hold and on the back of printer for at least three seconds to start WPS Push Button
method.
The Edge lighting shows two small bars glowing blue and the outside edges of the large light bar pulsing
blue, repeating.
2. Press the WPS button on your router.
NOTE: The product begins a timer for approximately two minutes while a wireless connection is established.
If the printer connects successfully, the large light bar of the Edge lighting glows light blue in the center.
30 Chapter 4 Connect your printer ENWW
Loading ...
Loading ...
Loading ...