Loading ...
Loading ...
Loading ...
Connect using the HP Smart app
To set up using the HP Smart app
You can use the HP Smart app to set up the printer on your wireless network. The HP Smart app is supported
on iOS, Android, and Windows devices. For information about this app, see Use the HP Smart app to print,
copy, scan, and troubleshoot.
1. Make sure your computer or mobile device is connected to your wireless network and you know the Wi-Fi
password of your wireless network.
2. If you are using an iOS or Android mobile device, make sure that Bluetooth is turned on. (HP Smart uses
Bluetooth to make the setup process faster and easier on iOS and Android mobile devices.)
NOTE: HP Smart uses Bluetooth for printer setup only. Printing using Bluetooth is not supported.
3. Make sure the printer is in the Auto Wireless Connect (AWC) setup mode.
When the printer enters the AWC setup mode, the Edge lighting shows the two small light bars glowing
blue, while the lower large light bar pulses blue from the middle outward, repeating.
If this is the rst time you set up the printer, the printer is ready for setup after the printer is powered
on. It keeps searching for the HP Smart app to connect within two hours, and then stops searching.
To put the printer back into the AWC setup mode, on the back of the printer, press and hold (the Wi-
Fi button) for at least three seconds.
4. Open the HP Smart app, and then do one of the following:
● iOS/Android: On the home screen, tap the Plus icon and then select the printer. If the printer is not
in the list, tap Add a new printer. Follow the onscreen instructions to add the printer to your
network.
● Windows: On the home screen, click or tap Find Printer. If the printer is not found, click or tap Set
up a new printer. Follow the onscreen instructions to add the printer to your network.
ENWW Connect using the HP Smart app 29
Loading ...
Loading ...
Loading ...